| Close |
Message | User | Date(yyyy-mm-dd) |
|

|
37ºC incubator room | oroos | 2007-09-27 | Click here to register. |
|---|
| I would like to know which is the better material to construct a 37ºC incubator room . Actually I have a incubator with the floor in wood but it need some repair Can someone help me ? | | |
| KDHughes | 2007-10-04 | Click here to register. |
|---|
 | So much of it depends on what you're planning on putting in the incubator - but under any circumstances I would put in cleanable surfaces all around. I don't think that wood is probably your best choice. You want something that you can mop easily; you also want to be able to sanitize the surfaces of the room from time to time. Anything that could shed particulates - like wood - is probably a bad idea in a cell culture facility. |
| | |
| JAR | 2007-10-25 | Click here to register. |
|---|
 | I would use a seamless material such as vinyl or linoleum which can be easily washed. The flooring should also curve at the edges so that it runs three inches or so up the wall so there is not seam where it meets the wall. |
|
|
| Thanks for visiting.- To ask or answer a question, you need to register here.
- You can browse by clicking on a message subject to see the complete message.
- If you have previously registered, you can log in below.
|
|