The CF-1 Fraction Collector, a laboratory workhorse.

CellCultureChat.com:   The Answers for All of Your Cell Culture Questions.


Close MessageUserDate(yyyy-mm-dd)
Previous Subject
Next Subject
37ºC incubator roomoroos2007-09-27Click here to register.
I would like to know which is the better material to construct a 37ºC incubator room . Actually I have a incubator with the floor in wood but it need some repair Can someone help me ?
 
Re: 37ºC incubator room
KDHughes2007-10-04Click here to register.
So much of it depends on what you're planning on putting in the incubator - but under any circumstances I would put in cleanable surfaces all around. I don't think that wood is probably your best choice. You want something that you can mop easily; you also want to be able to sanitize the surfaces of the room from time to time. Anything that could shed particulates - like wood - is probably a bad idea in a cell culture facility.
 
Re: 37ºC incubator room
JAR2007-10-25Click here to register.
I would use a seamless material such as vinyl or linoleum which can be easily washed. The flooring should also curve at the edges so that it runs three inches or so up the wall so there is not seam where it meets the wall.

Thanks for visiting.
  • To ask or answer a question, you need to register here.
  • You can browse by clicking on a message subject to see the complete message.
  • If you have previously registered, you can log in below.


Message (click on a subject to view the messages)
Click for older messages
OlderOlder LastOldest
Click for newer messages
NewestFirst LastNewer
Search for messages that contain  

You must register before asking a question or providing an answer.
You can click here to register. If you have already registered you can log in below.
(If you check the Use Cookies box then your computer will remember your log in name.)
User Name:
Password:


Click here if you previously registered and remember your user name but not your password.
Email us at cccc@lplc.com if you are having other problems.




Back to Top

All the Perl that's Practical to Extract and Report